H-4325 - Door Hinge Installation Guide

The H-4325 Stainless Steel Door Hinges offer easy installation and durability. Each pack includes 3 heavy-duty hinges (4" x 3") with 2.5mm thickness and 24 solid screws, providing everything you need for a seamless installation.

Follow these steps to ensure a smooth and secure setup:

Tools You Will Need:

• Power drill or screwdriver
• Measuring tape
• Pencil
• Level

Step-by-Step Installation:

1. Mark Hinge Placement:
2. Measure and mark where the hinges will be positioned on the door and frame. For best results, place one hinge 5 inches from the top, one 10 inches from the bottom, and the third hinge in the center of the door.
3. Use a level to confirm the marks are straight and aligned.
4. Pre-Drill Holes:
5. Align the hinge with your marks and outline the screw holes with a pencil.
6. Pre-drill small holes to make screw insertion easier and to avoid splitting the wood.
7. Attach the Hinges:
8. Place the hinge on the door and secure it using the provided screws. Tighten the screws evenly so the hinge sits flush.
9. Repeat this process for the door frame, ensuring all three hinges are aligned.
10. Test the Door:
11. Open and close the door to ensure smooth operation. While the hinge allows 360-degree rotation before installation, the door itself will move within the frame’s natural limits. If the door sticks or feels misaligned, adjust the hinge placement or tighten the screws.
12. Final Check:
13. Ensure all screws are tightly secured, and the door swings smoothly without noise or resistance.

Upgrade your doors with hinges that blend seamless functionality and refined aesthetics.